Show Mac-Aging-Time; Show Module - Avaya P330 Reference Manual

Example:
P330-N>show mac-aging
mac aging application is disabled

show mac-aging-time

User level: user, privileged, supervisor
This command is available on P330-ML switches only.
Use the show mac-aging-time command to display the MAC aging time in
minutes.
The syntax for this command is:
show mac-aging-time
Example:
P330-N>show mac-aging-time
MAC aging time is 5 (min.)
The displayed value is the aging-time lower bound. The actual aging-time can
be up to 2 minutes longer.

show module

User level: user, privileged, supervisor
Use the show module command to display switch status and information. For
each switch with an expansion sub-module installed, both switch and expansion
sub-module type and information are shown.
The syntax for this command is:
show module [<mod_num>]
mod_num
Avaya P330 Reference Guide
Chapter 2
(Optional) Number of the switch/expansion sub-module. If
you do not specify a number, all switches/expansion sub-
modules are shown.
Avaya P330 Layer 2 CLI Commands
123