Clear Ip Traffic; Clear Screen; Clear Vlan - Avaya P330 Reference Manual

clear ip traffic

User level: privileged, supervisor.
This command does not apply to the P333R-LB.
Use the clear ip traffic command to clear the ip traffic statistics counters.
The syntax for this command is:
clear ip traffic
Example:
Router-N# clear ip traffic

clear screen

User level: user, privileged, supervisor
Use the clear screen command to clear the screen.
The syntax for this command is:
clear screen

clear vlan

User level: privileged, supervisor.
If you are at the "privileged" level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter Configure mode if
necessary.
Use the clear vlan command to delete a Router layer 3 VLAN.
The syntax for this command is:
clear vlan [<ifIndex>] | [name <ifname>]
ifIndex
ifname
Example:
Router-N(configure)# clear vlan 2 name vlan2
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".
Avaya P330 Reference Guide
Chapter 3 Avaya P330 Layer 3 CLI Commands
VLAN number
VLAN name
167