Set Port Spantree Enable; Set Port Spantree Force-Protocol-Migration - Avaya P330 Reference Manual

Chapter 2 Avaya P330 Layer 2 CLI Commands
Example:
P330-N# set port spantree disable 3/1
port 3/1 was disabled on spantree

set port spantree enable

User level: privileged, supervisor.
Use the set port spantree enable command to enable the spanning tree
mode for specific switch ports.
The syntax for this command is:
set port spantree enable [module/port]
Module
Port
Example:
P330-N# set port spantree enable 3/1
port 3/1 was enabled on spantree

set port spantree force-protocol-migration

User level: privileged, supervisor.
Use the set port spantree force-protocol-migration command to set
the port as an RSTP port (and not as common STA port). It forces the port to send a
rapid spanning tree BPDU.
The syntax for this command is:
set port spantree force-protocol-migration <module/port>
module/
port
Example:
P330-N>set port spantree force-protocol-migration 1/1
port 1/1 is forced to send a Rapid spanning tree BPDU
76
Module number
Port number
Port identifier
Avaya P330 Reference Guide