Set Time Protocol; Set Time Server - Avaya P330 Reference Manual

set time protocol

User level: privileged, supervisor.
Use the set time protocol command to set the protocol for use in the system as
either SNTP protocol or TIME protocol.
The syntax for this command is:
set time protocol
sntp-protocol
time-protocol
Example:
P330-N>set time protocol sntp-protocol
The protocol has been set to SNTP protocol
P330-N> set time protocol time-protocol
The protocol has been set to TIME protocol

set time server

User level: privileged, supervisor.
Use the set time server command to set the TIME server address.
The syntax for this command is:
set time server <ip address>
ip address
Example:
P330-N# set time server 192.49.53.68
The Server Ip has been set to 192.49.53.68
Avaya P330 Reference Guide
Chapter 2
[sntp-protocol|time-protocol]
Use the SNTP protocol
Use the TIME protocol
IP address of the TIME server.
Avaya P330 Layer 2 CLI Commands
97