Chapter 4
Load Balancing CLI Commands
Proxy IP (PIP) Commands
To configure a Proxy IP (PIP) for a Virtual Service:
1
Use the pip-bank command to create/enter the PIP context.
2
For a new PIP, enter the bank-id of the PIP to set the index number for the
PIP.
3
Use the pip address command to finish defining the PIP.
4
Within the Virtual Service context, choose an index number of one of the PIPs
created.
pip-addresses
User level: privileged, supervisor
Use the pip-addresses command to configure the range of PIP addresses.
Syntax
pip-addresses <pip start address> <pip end address>
pip start address
pip end address
Example:
Router-N(super-pip-bank:1)# pip-addresses 10.1.1.1
10.1.2.2
pip-bank
User level: privileged, supervisor
Use the pip-bank command to configure a PIP.
The syntax for this command is:
pip-bank <bank-id>
bank-id
Example:
Router-N(super)# pip-bank 12
278
The first PIP address of the range.
The last PIP address of the range.
The index number of the PIP, an integer up to 64.
Avaya P330 Reference Guide