show port mirror
User level: user, privileged, supervisor
Use the show port mirror command to display mirroring information for the stack.
The syntax for this command is:
show port mirror
Example:
P330-N>show port mirror
port mirroring
--------------
Mirroring both Rx and Tx packets from port 3/2 to port 4/4
is enabled
P330-N>show port mirror
port mirroring
--------------
No ports are mirrored
show port point-to-point status
User level: user, privileged, supervisor
Use the show port point-to-point status command to show the port's
point-to-point admin and operational RSTP status.
The syntax for this command is:
show port point-to-point status <module/port>
module/
port
Example:
P330-N>show port point-to-point status
Port
-------
1/1
1/2
1/3
1/4
1/5
1/6
1/7
Avaya P330 Reference Guide
Port identifier
point-to-point admin state
----------------------------
auto
auto
auto
auto
auto
auto
auto
Chapter 2
Avaya P330 Layer 2 CLI Commands
point-to-point oper state
--------------------------
point to point connection
point to point connection
point to point connection
point to point connection
point to point connection
point to point connection
point to point connection
135