Ar-Filter Commands; Ar-Filter - Avaya P330 Reference Manual

Chapter 4 Load Balancing CLI Commands
Table 4.1
virtual ar-service
virtual fw-service
virtual-server
virtual-server virtual-slb-service

AR-Filter Commands

This section illustrates the ar-filter commands.

ar-filter

User level: privileged, supervisor
Use the ar-filter command to create an Application Redirection (AR) filter.
The syntax for this command is:
ar-filter <id>
{<source-ip> <source-wildcard> | any | host <source-ip}
{<destination-ip> <destination-wildcard> | any | host
<destination-ip}
<vSrvc> [<uni-directional | bi-directional>]
id
source-ip
source-wildcard
destination-ip
any
destination-wildcard
vSrvc
uni-directional
bi-directional
260
Load Balancing Command Groups (Continued)
The identification number, an integer from 1 to 1024.
The client IP address.
The client IP network wildcard.
The server IP address.
Any IP address.
The server IP network wildcard.
A name, with up to 32 characters, a service ID (an
integer from 1 to 1024), or no-ar.
The ar-filter is applied in the direction from the
source to the destination.
The ar-filter is applied in both directions.
306
313
321
324
Avaya P330 Reference Guide