Ip Access-List-Name; Ip Access-List-Owner - Avaya P330 Reference Manual

Chapter 2 Avaya P330 Layer 2 CLI Commands
untrusted
trust-cos
trust-dscp
Example:
Router-N# ip access-list-dscp trust 100 trust-dscp
Done!

ip access-list-name

User level: privileged, supervisor.
This command applies to the P334T-ML only when it is in device mode
"Layer2".
Use the ip access-list-name command to assign a name to a policy list.
The syntax for this command is:
ip access-list-name <policy-list-number> <name>
<policy-list-number>
<name>
Example:
Router-N# ip access-list-name 101 morning
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".

ip access-list-owner

User level: privileged, supervisor.
This command applies to the P334T-ML only when it is in device mode
"Layer2".
Use the ip access-list-owner command to set the owner for a specific policy
list.
30
Forward the packet with priority 0
Forward the packet with its original 802.1p priority (default)
Forward the packet with the maximum priority between 802.1p and
the priority obtained from the DSCP-CoS mapping table
integer (100...149)
list name
Avaya P330 Reference Guide