Real-Bridging-Fw Hc Success-Retries; Real-Bridging-Fw Hc Timeout - Avaya P330 Reference Manual

Example:
Router-N(configure)# hc interval 10

real-bridging-fw hc success-retries

User level: privileged, supervisor
Use the hc success-retries command to set the number of times the real
bridging firewall should be health-checked before determining success. Use the no
hc form of this command to set the success-retries to the default value (1).
The syntax for this command is:
[no] hc success-retries <success-retries>
success-retries
Example:
Router-N(configure)# success-retries 10

real-bridging-fw hc timeout

User level: privileged, supervisor
Use the hc timeout command to set the amount of time after which the real
bridging firewall is considered to have "timed out". Use the no form of this
command to set the time-out to the default value (1 second).
The syntax for this command is:
[no] hc timeout <time-sec>
time-sec
Example:
Router-N(configure)# hc timeout 10
Avaya P330 Reference Guide
Chapter 4
The number of times, an integer from 1 to 32.
The amount of time in seconds, an integer.
Load Balancing CLI Commands
291