Chapter 2
Avaya P330 Layer 2 CLI Commands
clear dynamic vlans
User level: privileged, supervisor.
This command is available on the P330-ML only.
Use the clear dynamic vlans command to clear dynamically learned VLANs.
Only the VLANs learned by the switch from incoming traffic are cleared using this
command.
The syntax for this command is:
clear dynamic vlans
Example:
P330-N# clear dynamic vlans
This command will delete all the vlans that were
dynamically learned by the device - do you want to continue
(Y/N)? y
Dynamic vlans were deleted from device tables
clear log
User level: privileged, supervisor.
Use the clear log command to delete the log file of a switch.
The syntax for this command is:
clear log [<module]
module
(Optional)
Example:
P330-N# clear log
Cleared all logfiles.
10
Number of switch (1...10)
Avaya P330 Reference Guide