Set System Location; Set System Name - Avaya P330 Reference Manual

set system location

User level: user, privileged, supervisor
Use the set system location command to set the system location MIB variable
The syntax for this command is:
set system location [string]
string
Example:
Router-N(super)# set system location "tech support"
Done!
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".

set system name

User level: privileged, supervisor.
Use the set system name command to set the mib2 system name MIB variable.
The syntax for this command is:
set system name [string]
string
Example:
Router-N(super)# set system name P330-1
Done!
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".
Avaya P330 Reference Guide
Chapter 3
System name
• The system name string should be typed inside inverted
commas.
• The name is cleared if you leave this field blank.
Avaya P330 Layer 3 CLI Commands
201