Timers Spf - Avaya P330 Reference Manual

Example:
Router-N(configure router:ospf)# redistribute static

timers spf

User level: privileged, supervisor.
Use the timers spf command to configure the delay between runs of OSPF's
SPF calculation. Use the no form of this command to restore the default (3 seconds).
The syntax for this command is:
[no] timers spf <spf-holdtime>
spf-holdtime
Example:
Router-N(configure router:rip)# timers spf 5
Done!
Avaya P330 Reference Guide
Chapter 3
The time in seconds of the delay between runs of
OSPF's SPF calculation.
Avaya P330 Layer 3 CLI Commands
257