Show Erase Status; Show Image Version; Show Intelligent-Multicast - Avaya P330 Reference Manual

Chapter 2 Avaya P330 Layer 2 CLI Commands

show erase status

User level: user, privileged, supervisor
Use the show erase status command to view the status of the erase
configuration operation.
The syntax for this command is:
show erase status

show image version

User level: user, privileged, supervisor
Use the show image version command to display the software version of the
image on both memory banks of a specified switch.
The syntax for this command is:
show image version [<mod_num>]
If no switch number is specified, the image version of the all switches will be
displayed.
Example:
P330-N>show image version 1
Mod
------
1
1

show intelligent-multicast

User level: user, privileged, supervisor
Use the show intelligent-multicast command to display the intelligent
multicast configuration.
The syntax for this command is:
show intelligent-multicast
Example:
P330-N>show intelligent-multicast
Intelligent-multicast configuration:
------------------------------------
intelligent-multicast state ---------------------- Disabled
Intelligent-multicast client-port-pruning time ---
Intelligent-multicast router-port-pruning time ---
intelligent-multicast group-filtering-delay time -
108
Module-Type
-----------
24x10/100Base-T with optional expansion slot
24x10/100Base-T with optional expansion slot
Bank Version
---- --------
A 4.0.3
B 4.0.3
600[Sec]
1800[Sec]
10[Sec]
Avaya P330 Reference Guide