Chapter 4
Load Balancing CLI Commands
rsg real-slb-server
User level: privileged, supervisor
Use the real-slb-server command to map a real SLB server to the real server
group as well as to set the real server to use Server Load Balancing. Use the no
form of this command to remove a real SLB server from the real-server group.
The syntax for this command is:
[no] real-slb-server <server-ip>
server-ip
Example:
Router-N(configure)# real-slb-server 10.1.1.2
show rsg
User level: user, privileged, supervisor
Use the show rsg command to display all real server groups.
The syntax for this command is:
show rsg [<rsg>]
rsg
Example:
Router-N> show rsg rsg1
302
The IP address of the real server.
The name of the real server group, a string up to 32 characters.
Avaya P330 Reference Guide