Show Ip Access Lists - Avaya P330 Reference Manual

Example:
P330-N>show ip access-list-dscp 101
Trust configuration is trust-cos
DSCP
---- -------------------- ---------- ------------
0 fwd0
1 fwd0
2 fwd0
3 fwd0
4 fwd0
5 fwd0
6 fwd0
7 fwd0
8 fwd1
9 fwd1
10 fwd1
11 fwd1

show ip access lists

User level: user, privileged, supervisor
Use the show ip access lists command to display all the current policy lists.
This command applies to the P334T-ML only, when it is in device mode
"Layer2".
The syntax for this command is:
show ip access-lists[<policy-list-number>]
policy-list-number
Example:
Router-N> show ip access-lists
The current policy source is local
default List (0) parameters
List Owner : other
List 0 is valid
default action for list 0 is permit
Avaya P330 Reference Guide
Action
The policy list number (integer from 100 to 199; 0 is th
default list).
Chapter 2 Avaya P330 Layer 2 CLI Commands
Precedence Name
mandatory DSCP#0
mandatory DSCP#1
mandatory DSCP#2
mandatory DSCP#3
mandatory DSCP#4
mandatory DSCP#5
mandatory DSCP#6
mandatory DSCP#7
mandatory DSCP#8
mandatory DSCP#9
mandatory DSCP#10
mandatory DSCP#11
113