Example:
P330-N# set port disable 4/1
Port 4/1 disabled.
set port dot1x initialize
Use the set port dot1x initialize command to initialize port dot1x.
The syntax for this command is:
set port dot1x initialize <module/port>
module/
port
Example:
P330-1(super)# set port dot1x initialize 2/3
port 1/2 dot1x was initialized
set port dot1x max-req
User level: supervisor
Use the set port dot1x max-req command to set the maximal number of times
the port tries to retransmit requests to the Authenticated Station before the session is
terminated.
The syntax for this command is:
set port dot1x max-req <module/port> <count>
module/
port
count
Example:
P330-1(super)# set port dot1x max-req 1/2 5
Avaya P330 Reference Guide
Module and port number (or range of ports)
Module and port number (or range of ports)
Number of attempts — 1-10
Chapter 2
Avaya P330 Layer 2 CLI Commands
61