Virtual Ar Service Commands; Show Virtual-Ar-Service; Show Virtual-Ar-Service Details - Avaya P330 Reference Manual

Chapter 4 Load Balancing CLI Commands

Virtual AR Service Commands

To configure a virtual Application Redirection (AR) service:
1 Use the virtual-ar service command to enter a virtual AR context.
2 For a new AR service, use the id command to set the identification number of
the virtual ar service (see virtual-ar-service id on page 310).
3 Use any of the remaining virtual-ar service commands as required.

show virtual-ar-service

User level: user, privileged, supervisor
Use the show virtual-ar-service command to display all virtual AR
services.
The syntax for this command is:
show virtual-ar-service [<service>]
service
Example:
Router-N> show virtual-ar-service ArSrvc1

show virtual-ar-service details

User level: user, privileged, supervisor
Use the show virtual-ar-service details command to display the full
details of all virtual AR services.
The syntax for this command is:
show virtual-ar-service details [<service>]
service
Example:
Router-N> show virtual-ar-service details ArSrvc1
306
The name of the virtual AR service, a string up to 32 characters.
The name of the virtual AR service, a string up to 32 characters.
Avaya P330 Reference Guide