Chapter 2
Avaya P330 Layer 2 CLI Commands
clear radius authentication server
User level: privileged, supervisor.
Removes a primary or secondary RADIUS authentication server.
The syntax for this command is:
clear radius authentication server[{primary|secondary}]
primary
secondary
Example:
P330-1(super)# clear radius authentication server secondary
clear screen
User level: user, privileged, supervisor
Use the clear screen command to clear the current terminal display.
The syntax for this command is:
clear screen
clear secure mac
User level: privileged, supervisor.
This command is is not available on P330-ML switches.
If this command is to be implemented on a switch other than the stack master, a
session should be opened to the relevant switch.
Use the clear secure mac command to remove a MAC address from the CAM
table of a secured port.
The syntax for this command is:
clear secure mac <mac-address> port <mod-num>/<port-num>
mac-address
mod-num
port-num
12
Remove primary RADIUS server
Remove secondary RADIUS server
MAC address to be cleared
Module where the secured port is located
Secured port number
Avaya P330 Reference Guide