Clear Vlan 100; Copy Module-Config Tftp - Avaya P330 Reference Manual

Chapter 2 Avaya P330 Layer 2 CLI Commands
clear vlan
User level: privileged, supervisor.
Use the clear vlan command to delete an existing VLAN and return ports from
this VLAN to the default VLAN #1. When you clear a VLAN, all ports assigned to
that VLAN are assigned to the default VLAN #1.
The syntax for this command is:
clear vlan [<vlan-id>|name <vlan_name>]
vlan_id
vlan_name
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".
Example:
P330-N#
This command will assign all ports on vlan 100 to their
default in the entire management domain - do you want to
continue (Y/N)?
VLAN 100 was deleted successfully

copy module-config tftp

Use the copy module-config tftp command to upload the switch-level
parameters from the current NVRAM running configuration into a file via TFTP.
If an error occurred during upload (you can check this using the command show
tftp upload status) you must fix the problem. The following is a list of
possible problems:
a You did not create an empty text file at the destination server (0 Bytes).
b You do not have the correct path to the file.
c The destination server is not active/on.
d The destination server is unreachable.
Then, perform the upload procedure again twice as follows:
a Delete the destination file and recreate a correctly named empty file at the
destination server (0 bytes)
b Type the command copy module-config tftp for the first time.
c Delete the destination file and recreate a correctly named empty file at the
destination server (0 bytes)
d Type the command copy module-config tftp again, a second time.
14
VLAN number
VLAN name

clear vlan 100

y
Avaya P330 Reference Guide