Virtual-Server Virtual-Slb-Service Pip-Bank; Virtual-Server Virtual-Slb-Service Real-Port - Avaya P330 Reference Manual

Chapter 4 Load Balancing CLI Commands

virtual-server virtual-slb-service pip-bank

User level: privileged, supervisor
Use the pip-bank command to connect an existing PIP bank, and to create a new
PIP bank with a defined address range. Use the no form of this command to delete
a PIP.
The syntax for this command is:
[no] pip-bank <bank-id>[<pip start address><pip end address>]
bank-id
pip start address
pip end address
Example:
Router-N(super-v-slb-srvc:slb:http)# pip-bank 12 10.1.1.1
10.1.2.1
Router-N(super-v-slb-srvc:slb:http)# no pip-bank 12

virtual-server virtual-slb-service real-port

User level: privileged, supervisor
Use the real-port command to map a real port to the virtual SLB service. Use
the no form of this command to set the real-port for the virtual SLB service to the
default (0).
Syntax
[no] real-port <min-r-port>
min-r-port
Example:
Router-N(configure)#
330
The index number of the PIP, an integer up to 64.
The first PIP address of the range (for creating a PIP
bank).
The last PIP address of the range (for creating a PIP
bank).
Minimum real port number, from 0 to 65535.
real-port 12
Avaya P330 Reference Guide