real-ar-server weight
User level: privileged, supervisor
Use the weight command to set a weight for the real AR server. Use the no form
of this command to set the weight of the real AR server to the default (10).
The syntax for this command is:
[no] weight <weight>
weight
Example:
Router-N(configure)# weight 5
show real-ar-server
User level: user, privileged, supervisor
Use the show real-ar-server command to display all real servers using AR.
The syntax for this command is:
show real-ar-server [<server-ip>]
server-ip
Example:
Router-N> show real-ar-server 10.1.1.2
show real-ar-server details
User level: user, privileged, supervisor
Use the show real-ar-server details command to display the full details
of a real server using AR.
The syntax for this command is:
show real-ar-server details [<server-ip>]
server-ip
Example:
Router-N> show real-ar-server details 10.1.1.2
Avaya P330 Reference Guide
Chapter 4
The weight of the real server, an integer from 1 to 256.
The IP address of the real server.
The IP address of the real server.
Load Balancing CLI Commands
283