Show L2-Stack-Config - Avaya P330 Reference Manual

show l2-stack-config

User level: user, privileged, supervisor
Use the show l2-stack-config command to display Layer 2 stack
configuration.
The syntax for this command is:
show l2-stack-config
Example:
Router-N> show l2-stack-config
P330-1# !#
!# Upload time:
!# System description:
!# IP address, netmask:
!# Master position:
!# Number of modules:
!#
set spantree default-path-cost rapid-spanning-tree
!#
!# No intermodule port redundancy defined.
!#
!#
!# Set ARP-to-myself parameters
!#
set arp-tx-interval 5
!#
!# Set Leaky vlan mode.
!#
set leaky-vlan Disable
!#
!# Set ARP-Aging parameters
!#
set arp-aging-interval 10
--type q to quit or space key to continue--
#
!# Set MAC-Aging parameters
!#
set mac-aging disable
Avaya P330 Reference Guide
Chapter 2 Avaya P330 Layer 2 CLI Commands
Unavailable Unavailable
Avaya Inc. - P330
149.49.54.57 255.255.255.0
1
1
119