Virtual Ar-Service; Virtual-Ar-Service Admin-Status; Virtual-Ar-Service Application - Avaya P330 Reference Manual

virtual ar-service

User level: privileged, supervisor
Use the virtual-ar service command to create/enter a virtual AR service
context.
The syntax for this command is:
virtual-ar service <name>
name
Example:
Router-N(configure)# virtual-fw service Vsrvc1

virtual-ar-service admin-status

User level: privileged, supervisor
Use the admin-status command to set the virtual AR service administrative
status to enable or disable.
The syntax for this command is:
admin-status <enable | disable>
enable
disable
Example:
Router-N(configure)# admin-status enable

virtual-ar-service application

User level: privileged, supervisor
Use the application command to set the application for the virtual AR service.
Use the no form of this command to set the application to the default (IP-all ports).
The syntax for this command is:
[no] application <udp | tcp | ip | <protocol>> [<min-v-port>
[max-v-port]]
protocol
Avaya P330 Reference Guide
The name of the virtual AR service, a string of up to 32 characters.
Set admin status to enable.
Set admin status to disable.
An integer, from 0 to255.
Chapter 4 Load Balancing CLI Commands
307