Set Dot1X Tx-Period; Set Inband Vlan - Avaya P330 Reference Manual

• When a RADIUS server is not defined:
P330-1(super)# set dot1x system-auth-control enable
*** Warning : Authentication server ( RADIUS ) is disabled/
not-exist and so,
*** no authentication can be made
dot1x system-auth-control enabled

set dot1x tx-period

User level: supervisor
Use the set dot1x tx-period command to set the time interval between
attempts to access the Authenticated Station.
The syntax for this command is:
set dot1x tx-period <Seconds>
Seconds
Example:
P330-1(super)# set dot1x tx-period 90
Done!

set inband vlan

User level: privileged, supervisor.
Use the set inband vlan command to set the inband management VLAN.
The syntax for this command is:
set inband vlan <value>
value
Example:
P330-N# set inband vlan 1
Management VLAN number set to 1
Avaya P330 Reference Guide
Number of seconds – 0 to 65535
Number of the VLAN to be assigned to the management
interface.
Chapter 2 Avaya P330 Layer 2 CLI Commands
49