hc http method
User level: privileged, supervisor
Use the method command to set the HTTP Health Check method. Use the no
form of this command to set this to the default value.
The syntax for this command is:
[no] method <get|head>
get
head
Example:
Router-N(super-hc-http:7)# method get
hc http port
User level: privileged, supervisor
Use the port command to set the HTTP Health Check port. Use the no form of
this command to set this to the default value and the Virtual Service port is used.
You achieve the same result by entering the port command with no port number,
or with port number = 0.
The syntax for this command is:
port <port number>
port number
Example:
Router-N(super-hc-http:7)# port 65
Avaya P330 Reference Guide
Sets the method for the Health Check to GET - to retrieve all data
from the server.
Sets the method for the Health Check to HEAD - retrieves only the
HTTP headers without the document body. This is the default.
The port number used to open an HTTP session, an integer
from 0 - 65535.
Chapter 4
Load Balancing CLI Commands
271