Ip Vrrp Preempt; Ip Vrrp Primary - Avaya P330 Reference Manual

ip vrrp preempt

User level: privileged, supervisor.
Use the ip vrrp preempt command to configure the router to preempt a lower
priority master for the virtual router ID.
Use the no ip vrrp preempt command to disable preemption for the virtual
router instance.
By default, preemption is enabled.
The syntax for this command is:
[no] ip vrrp <vr-id> preempt
vr-id
Example:
Router-N(configure-if:marketing) # ip vrrp 1 preempt
Done!

ip vrrp primary

User level: privileged, supervisor.
Use the ip vrrp primary command to set the primary address that shall be
used as the source address of VRRP packets for the virtual router ID.
Use the no ip vrrp primary command to return to the default primary address
for the virtual router instance.
By default, the primary address is selected automatically by the device.
The syntax for this command is:
[no] ip vrrp <vr-id> primary <ip-address>
vr-id
ip-address
Example:
Router-N(configure-if:marketing) # ip vrrp 1 primary
192.168.66.23
Done!
Avaya P330 Reference Guide
Chapter 3
Virtual Router ID (1-255)
Virtual Router ID (1-255)
Primary IP address of the virtual router. This address
should be one of the router addresses on the VLAN.
Avaya P330 Layer 3 CLI Commands
251