Set System Contact; Set System Location - Avaya P330 Reference Manual

set system contact

User level: user, privileged, supervisor
Use the set system contact command to set the mib2 system contact MIB
variable.
The syntax for this command is:
set system contact [string]
string
Example:
P330-1(super)# set system contact "gregory kohll"
*** Set system contact ***
system contact set

set system location

User level: user, privileged, supervisor
Use the set system location command to set the mib2 system location MIB
variable
The syntax for this command is:
set system location [string]
string
Example:
P330-N# set system location "tech-support"
*** Set system location ***
system location set
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".
Avaya P330 Reference Guide
Chapter 2
• The contact name string should be typed inside inverted
commas.
• The name is cleared if you leave this field blank.
• The location name string should be typed inside inverted
commas.
• The location is cleared if you leave this field blank.
Avaya P330 Layer 2 CLI Commands
95