Rsg Real-Bridging-Fw; Rsg Real-Routing-Fw - Avaya P330 Reference Manual

rsg real-bridging-fw

User level: privileged, supervisor
Use the real-bridging-fw command to map a real bridging firewall to the real
server group as well as to set the real firewall to use Bridging Firewall Load
Balancing. Use the no form of this command to remove a real bridging firewall
from the real-server group.
The syntax for this command is:
[no] real-bridging-fw <server-ip>
server-ip
Example:
Router-N(configure)# real-bridging-fw 10.1.1.2

rsg real-routing-fw

User level: privileged, supervisor
Use the real-routing-fw command to map a real routing firewall to the real
server group, as well as to set the real firewall to use Routing Firewall Load
Balancing. Use the no form of this command to remove a real routing firewall
from the real-server group.
The syntax for this command is:
[no] real-routing-fw <server-ip> [<server-id>]
server-ip
server-id
Example:
Router-N(configure)# real-routing-fw 10.1.1.2 5
Avaya P330 Reference Guide
The IP address of the real server.
The IP address of the real server.
The identification number of the real server, an integer from 1
to 1024, only relevant for routing firewalls. It is only
necessary to add the parameter server-id if the real server
group does not yet exist since typing it creates a real server.
Chapter 4 Load Balancing CLI Commands
301