Chapter 2
Avaya P330 Layer 2 CLI Commands
Output Fields:
Field
M#
file
ver num
file type
file location
file description
If N/A is displayed for the EW_Archive file, this means that the Device
Manager software is not loaded correctly. Download the Device Manager
software again.
24
Description
The switch number
There are several files loaded into the switch's memory:
• module-config – file which contains the configuration
settings made to this switch
• stack-config – file which contains the configuration settings
made at the stack level (for example IP address of the stack)
• EW_Archive – file which contains the Device Manager
(Embedded Web) software
•
Booter_Image - file containing the booter code executed
after rest. This file Can't be replaced by the user.
• startup-config - file which contains the startup (saved in
NVRAM) configuration for policy and routing in the P330-
ML, P333R and P333R-LB
• running-config - file which contains the running (currently
active) configuration for policy and routing in the P330-ML,
P333R and P333R-LB
S/W Version number – relevant only for Device Manager and
Booter image.
There are several file types:
• Running Conf – the configuration currently in use.
• Startup-config - startup configuration for policy and routing
in the P330-ML, P333R and P333R-LB
• SW boot image - Booter file
• SW Web Image – Device Manager S/W archive file
Type of internal memory into which the file is loaded
Description of the file
Avaya P330 Reference Guide