Show Ip Arp - Avaya P330 Reference Manual

Example:
Router-N> show ip access-list-summary
The policy lists summary:
default List (0)

show ip arp

User level: user, privileged, supervisor
Use the show ip arp command to display the Address Resolution Protocol (ARP)
cache.
The syntax for this command is:
show ip arp [<if-name> | <vlan> | <ip addr> | <ip-mask> static]
if-name
vlan
ip-addr
ip-mask
static
Example:
Router-N> show ip arp
Showing 3 rows
Address
--------------- ----------------- ------------ ------- --------
192.168.54.1
192.168.2.33
192.168.1.111
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".
Avaya P330 Reference Guide
Chapter 3
Interface name (string up to 32 chars)
VLAN NAME (string up to 16 chars) or VLAN ID (number)
The IP address of the station(s)
The ip mask of the routes.
Display static ip ARP information.
MAC Address
00:40:0d:8c:12:01
00:40:0d:5c:14:01
00:40:0d:5d:72:01
Avaya P330 Layer 3 CLI Commands
Interface Type
mgmt Dynamic
loco Static
ppp Static
TTL
14360
Not Aged
Not Aged
209