Real-Routing-Fw Hc Timeout; Real-Routing-Fw Id - Avaya P330 Reference Manual

Chapter 4 Load Balancing CLI Commands

real-routing-fw hc timeout

User level: privileged, supervisor
Use the hc timeout command to set the amount of time after which the real
routing firewall is considered to have "timed out". Use the no form of this
command to set the amount of time after which the real routing firewall is
considered to have "timed out" to the default (1 second).
The syntax for this command is:
[no] hc timeout <time-sec>
time-sec
Example:
Router-N(configure)# hc timeout 10

real-routing-fw id

User level: privileged, supervisor
Use the id command to set an identification number for a real routing firewall.
The syntax for this command is:
id <r-routing-fw-id>
r-routing-fw-id
Example:
Router-N(configure)# id 2
296
The amount of time in seconds, an integer.
The identification number, an integer from 1 to 1024.
Avaya P330 Reference Guide