Show Log; Show Logout; Show Mac-Aging - Avaya P330 Reference Manual

Chapter 2 Avaya P330 Layer 2 CLI Commands

show log

User level: user, privileged, supervisor
Use the show log command to display an encrypted device's reset log.
This command is for Avaya technical support use.
The syntax for this command is:
show log [mod_num]
Example:
P330-N>show log 1
MODULE 1, MESSAGE 01:
00000000 0 05002966 0205 0 0 0 0 0 0 0 0 0 0
MODULE 1, MESSAGE 02:
00000000 0 00004242 0205 0 0 0 0 0 0 0 0 0 0
MODULE 1, MESSAGE 03:
00000000 0 00002395 0205 0 0 0 0 0 0 0 0 0 0

show logout

User level: user, privileged, supervisor
Use the show logout command to display the amount of time the CLI remains
idle before timing out in minutes.
If the result is 0, there is no timeout limit. The default is 15 minutes.
The syntax for this command is:
show logout
Example:
P330-N>show logout
CLI timeout is 10 minutes

show mac-aging

User level: user, privileged, supervisor
This command is available on P330-ML switches only.
Use the show mac-aging command to display the current status of the MAC
aging function.
The syntax for this command is:
show mac-aging
122 Avaya P330 Reference Guide