Chapter 2
Avaya P330 Layer 2 CLI Commands
show ppp configuration
User level: user, privileged, supervisor
Use the show ppp configuration command to display the ppp configuration.
The syntax for this command is:
show ppp configuration
Example:
P330-N>show ppp configuration
PPP baud rate is 38400
PPP incoming timeout is 15 minutes
PPP Authentication Parameters:
------------------------------
Incoming:
show ppp incoming timeout
User level: user, privileged, supervisor
Use this show ppp incoming timeout command to display the amount of time
in minutes that a PPP session can remain idle before being automatically
disconnected.
The syntax for this command is:
show ppp incoming timeout
Example:
P330-N>show ppp incoming timeout
PPP incoming timeout is 15 minutes
show ppp session
User level: user, privileged, supervisor
Use the show ppp session command to display PPP parameters and statistics of
an active PPP session.
The syntax for this command is:
show ppp session
Example:
P330-N>show ppp session
142
None
Avaya P330 Reference Guide