Chapter 3
Avaya P330 Layer 3 CLI Commands
show vlan
User level: user, privileged, supervisor
Use the show vlan command to display router Layer 3 interfaces.
The syntax for this command is:
show vlan
Example:
Router-N> show vlan
VLAN NAME
---------------- ------- -----------------
Default
terminal
User level: user, privileged, supervisor
Use the terminal width and terminal length commands to set the width
and length of the terminal display in characters.
The syntax for this command is:
terminal {width|length} [<characters>]
Example:
Router-N> terminal width 80
terminal width: 80
traceroute
User level: user, privileged, supervisor
Use the traceroute command to initiate a traceroute to a remote host.
The syntax for this command is:
traceroute <host>
host
Example:
Router-N> traceroute 192.168.50.13
234
VLAN ID VLAN MAC
1 02:e0:3b:1d:f9:01
IP address.
Avaya P330 Reference Guide