Set Port Edge Admin State; Set Port Enable - Avaya P330 Reference Manual

Chapter 2 Avaya P330 Layer 2 CLI Commands
Example:
To set port 1 on module 4 to full duplex:
P330-N# set port duplex 4/1 full
Port 4/1 set to full-duplex.

set port edge admin state

User level: privileged, supervisor.
Use the set port edge admin state command to set the port as an RSTP
edge-port or non-edge-port.
The syntax for this command is:
set port edge admin state <module/port> <admin state>
module/
port
admin
state
Examples:
P330-N# set port edge admin state 1/1 edge-port
port 1/1 edge admin state is set to edge-port
P330-N# set port edge admin state 1/1 non-edge-port
port 1/1 edge admin state is set to non-edge-port

set port enable

User level: privileged, supervisor.
Use the set port enable command to enable a port or a range of ports.
The syntax for this command is:
set port enable [mod_num/port_num]
module
66
Port identifier
The port's admin satte can be set to either edge-port or non-edge-
port.
Number of the switch.
Avaya P330 Reference Guide