Chapter 3
Avaya P330 Layer 3 CLI Commands
ip vrrp priority
User level: privileged, supervisor.
Use the ip vrrp priority command to set the virtual router priority value
used when selecting a master router.
Use the no ip vrrp priority command to restore the default value.
The syntax for this command is:
[no] ip vrrp <vr-id> priority <pri-value>
vr-id
pri-value
Example:
To set the priority value for virtual router 1 to ten:
Router-N(configure-if:marketing) # ip vrrp 1 priority 10
Done!
Example:
To set the virtual router simple password for virtual router 1 to abcd:
Router-N(configure-if:marketing) # ip vrrp 1 auth-key abcd
Done!
ip vrrp timer
User level: privileged, supervisor.
Use the ip vrrp timer command to set the virtual router advertisement timer
value (in seconds) for the virtual router ID.
Use no ip vrrp timer command to restore the default value.
The syntax for this command is:
[no] ip vrrp <vr-id> timer <value>
vr-id
value
Example:
To set the virtual router advertisement timer value for virtual router 3 to 2:
Router-N(configure-if:marketing) # ip vrrp 3 timer 2
Done!
252
Virtual Router ID (1-255)
The priority value. The range is 1-254.
Virtual Router ID (1-255)
The advertisement transmit time (seconds).
Avaya P330 Reference Guide