Chapter 4
Load Balancing CLI Commands
min-v-port
max-v-port
Example:
Router-N(configure)# application udp 12 15
virtual-ar-service failure-action
User level: privileged, supervisor
Use the failure-action command to set the failure-action decision when no
operating real servers were found.
The syntax for this command is:
failure-action <forward | drop>
forward
drop
Example:
Router-N(configure)# failure-action
308
Minimum port number (from 0).
Maximum port number, an integer up to 65535.
Forwards the packet.
Drops the packet.
Avaya P330 Reference Guide