Copy Tftp Stack-Config - Avaya P330 Reference Manual

Example (for Windows):
Router-N# copy tftp module-config
192.168.49.10
Example: (for Unix):
Router-N# copy tftp module-config /folder/startup.cfg
192.168.49.10

copy tftp stack-config

Use the copy tftp stack-config command to download the stack-level
configuration from a saved file into the current NVRAM running configuration
from a TFTP server.
You should perform the nvram initialize command prior to the
copy tftp operation.
The syntax for this command is:
copy tftp stack-config <filename> <ip>
filename
ip
Example (for Windows):
Router-N# copy tftp stack-config c:\config\switch1.cfg
192.168.49.10
Example (for Unix):
Router-N# copy tftp stack-config /folder/switch1.cfg
192.168.49.10
Avaya P330 Reference Guide
Chapter 2
The file name (full path)
The IP address of the TFTP server
Avaya P330 Layer 2 CLI Commands
c:\config\switch1.cfg
19