Virtual-Fw-Service Persistency Wildcard; Virtual-Fw-Service Rsg - Avaya P330 Reference Manual

Example:
Router-N(configure)#
3000

virtual-fw-service persistency wildcard

User level: privileged, supervisor
Use the persistency wildcard command to set the persistency wildcard for
the virtual firewall service. The virtual-fw service persistency
wildcard command extends the range of client IP addresses to those which the
persistency applies. Use the no form of this command to set the persistency
wildcard for the virtual firewall service to the default (0.0.0.0)
The syntax for this command is:
[no] persistency wildcard <wildcard>
wildcard
Example:
Router-N(configure)#

virtual-fw-service rsg

User level: privileged, supervisor
Use the rsg command to map a real server group to the virtual firewall service.
Use the no form of this command to delete the mapping of a real server group
from the virtual firewall service.
The syntax for this command is:
[no] rsg <rsg>
rsg
Example:
Router-N(configure)# rsg rsg1
Avaya P330 Reference Guide
virtual-fw service persistency time
The client IP network wildcard.
persistency wildcard 0.0.15.255
The name of the real server group, either a string of up to 32
characters (the rsg-name), or an integer from 1 to 1024 (the rsg-id).
Chapter 4 Load Balancing CLI Commands
319