Set System Location Command; Set System Name Command; Set System Contact Command - Avaya P333R-LB User Manual

Chapter 5 Cajun Campus CLI – Layer 2

Set system location Command

Use the set system location command to set the mib2 system location MIB
variable.
The syntax for this command is:
set system location [<string>]
string

Set system name Command

Use the set system name command to set mib2 system name MIB variable.
The syntax for this command is:
set system name [<string>]
string
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".

Set system contact Command

Use the set system contact command to set mib2 system contact MIB
variable.
The syntax for this command is:
set system contact [<string>]
string
100
Location name. The location name is cleared if this field is left
blank. A string of 2 words or more must be type in quotation
marks – e.g. "Operations Floor".
System name. The system name is cleared if this field is left blank. A
string of 2 words or more must be type in quotation marks –
e.g. "Backbone Stack".
Contact person. The contact person field is cleared if this field is
blank. A string of 2 words or more must be type in quotation
marks – e.g. "Ygdal Naouri".
Avaya P333R-LB User's Guide