Real-Ar-Server Hc Success-Retries; Real-Ar-Server Hc Timeout - Avaya P330 Reference Manual

Chapter 4 Load Balancing CLI Commands
Example:
Router-N(configure)# hc interval 10

real-ar-server hc success-retries

User level: privileged, supervisor
Use the hc success-retries command to set the number of times the real AR
server should be health-checked before determining success. Use the no form of
this command to set the success-retries (the number of times the real AR server
should be health-checked before determining success) to the default (1).
The syntax for this command is:
[no] hc success-retries <success-retries>
success-retries
Example:
Router-N(configure)# hc success-retries 10

real-ar-server hc timeout

User level: privileged, supervisor
Use the hc timeout command to set the amount of time after which the real AR
server is considered to have "timed out". Use the no form of this command to set
the amount of time after which the real AR server is considered to have "timed out"
to the default (1 second).
The syntax for this command is:
[no] hc timeout <time-sec>
time-sec
Example:
Router-N(configure)# hc timeout 10
282
The number of times, an integer from 1 to 32.
The amount of time in seconds, an integer.
Avaya P330 Reference Guide