Copy Running-Config Startup-Config - Avaya P330 Reference Manual

The syntax for this command is:
copy module-config tftp <filename> <ip> <mod_num>
filename
ip
mod-num
Example:
P330-N# copy module-config tftp c:\config\switch1.cfg 192.168.49.10 5
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show tftp upload status' command
********************************************************************
* If you are currently running the P330 Device Manager application,*
* it is recommended to exit from it before performing configuration*
* download operations.
********************************************************************

copy running-config startup-config

User level: privileged, supervisor.
This command applies to the P334T-ML only when it is in "Layer2"
device mode.
Use the copy running-config startup-config command to copy the active
policy configuration to the startup configuration file in the NVRAM.
The syntax for this command is:
copy running-config startup-config
Example:
P330-N# copy running-config startup-config
Avaya P330 Reference Guide
Chapter 2
The file name (full path)
The IP address of the TFTP server
The switch number
Avaya P330 Layer 2 CLI Commands
*
15