Chapter 6
Avaya P130 CLI
Set system name Command
Use the set system name command to set the mib2 system name MIB variable.
The syntax for this command is:
set system name [string]
string
Set system contact Command
Use the set system contact command to set the mib2 system contact MIB
variable.
The syntax for this command is:
set system contact [string]
string
Show image version Command
Use the show image version command to display the software version of the
image of a specified module.
The syntax for this command is:
show image version [mod_num]
[mod_num]
If a module number is not specified, the image version of all the modules will be
displayed.
Example:
P130-N> show image version
Mod
Module-Type
------
-----------
1
Policy capable switch, 24 10/100BaseT and 2 GBIC ports
48
Name string. The name is cleared if this field is blank.
System contact string. The system contact is cleared if this field
is blank.
Module number
Bank
Version
----
-------
A
1.1.5
Avaya P130 User's Guide