Show Policy Type - Avaya P330 Reference Manual

Virtual Router on VLAN:
Router-id:
State:
Priority:
Advertisement Interval:
Last State Change:
Override Address Ownership Rule: No
Authentication Type:
Authentication Key:
Master IP Address
Has 1 IP addresses
IP addresses:
192.168.66.24
Primary IP Address:
Primary IP Address was chosen by default
Preemption Mode:
# of times Master:
# of received Advertisements:
# of transmitted Advertisements:
# of received Advertisements with Security Violations: 0
Router-N>

show policy type

User level: user, privileged, supervisor
This command is available on the P334T-ML only.
Use the show policy type command to show whether the module enforces the
active policy-list on all packets or only on routed packets (for modules in 'device-
mode router').
The syntax for this command is:
show policy type
Example:
Router-N# show policy type
Policy type is router
Avaya P330 Reference Guide
Chapter 3 Avaya P330 Layer 3 CLI Commands
1
2
BACKUP
100
1
00:00:00
None
""
0.0.0.0
192.168.66.23
enabled
1
0
13
225