Show Rmon2 Matrix; Show Rmon2 Subnets - Avaya P330 Reference Manual

Chapter 3 Avaya P330 Layer 3 CLI Commands

show rmon2 matrix

User level: user, privileged, supervisor
Use the show rmon2 matrix command to display RMON2 matrix information.
The syntax for this command is:
show rmon2 matrix [<SrcIpAddr> [<dstIpAddr>]]
SrcIpAddrr
dstIpAddr
Example:
Router-N# show rmon2 matrix
Source
----------------------
192.168.244.201
192.168.244.201
192.168.244.201
192.168.244.201
192.168.244.201

show rmon2 subnets

User level: user, privileged, supervisor
Use the show rmon2 subnets command to display the RMON2 information for
subnets.
The syntax for this command is:
show rmon2 subnets [<ip addr> <ip mask>]
ip addr
ip mask
228
Source IP address
Destination IP address
Destination
--------------
192.168.5.1
192.168.5.2
192.168.5.3
192.168.5.4
192.168.5.5
IP address
IP subnet mask
S->D Packets D->S Packets
------------ ------------
3
3
3
3
3
Avaya P330 Reference Guide
3
3
3
3
3