Health Check Commands
To configure a Health Check for a Virtual Service:
1
Use the appropriate hc command to create/enter a Health Check context.
2
For a new Health Check, enter the hc-id of the service to set the index
number for the Health Check service.
3
Use the remaining hc commands to finish defining the Health Check. The
remaining Health Check commands are performed in the specific Health Check
context configured, depending on the Health Check type chosen.
4
Within the Virtual Service context, choose an index number of one of the Health
Checks created.
hc http
User level: privileged, supervisor
Use the hc http command to create/enter the HTTP Health Check context.
The syntax for this command is:
hc http <hc-id>
hc-id
Example:
Router-N (super) #
hc http domain
User level: privileged, supervisor
Use the domain command to set the HTTP Health Check domain. Use the no
form of this command to clear the domain. This command is for HTTP 1.1 only.
The syntax for this command is:
[no] domain <domain>
domain
Example:
Router-N(super-hc-http:7)# domain www.avaya.com
To define a name that includes spaces, enclose the entire name in quotation
marks (e.g., "new york").
Avaya P330 Reference Guide
The index number of the Health Check, an integer up to 32.
hc http 7
The domain name for the Health Check to retrieve from - a string
up to 255 characters.
Chapter 4
Load Balancing CLI Commands
269