Copy Startup-Config Tftp - Avaya P330 Reference Manual

Example:
P330-N# copy stack-config tftp c:\conf.cfg 192.168.49.10
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'upload status' command
********************************************************************
* If you are currently running the P330 Device Manager application,*
* it is recommended to exit from it before performing configuration*
* download operations.
********************************************************************

copy startup-config tftp

User level: privileged, supervisor.
This command applies to the P334T-ML only when it is in "Layer2"
device mode.
Use the copy startup-config tftp command to download a policy
configuration from a TFTP server.
The syntax for this command is:
copy startup-config tftp <filename> <ip>
filename
ip
Example (for Windows):
Router-N (super) # copy startup-config tftp
c:\p330\startup.cfg 149.49.100.41
Example: (for Unix):
Router-N (super) # copy startup-config tftp /folder/p330/
startup.cfg 149.49.100.41
Avaya P330 Reference Guide
Destination file name in the tftp server (full path).
The ip address of the tftp server.
Chapter 2 Avaya P330 Layer 2 CLI Commands
*
17