Tech; Terminal; Username - Avaya P330 Reference Manual

Chapter 2 Avaya P330 Layer 2 CLI Commands
The syntax for this command is:
sync time
Example:
P330-N# sync time
Time has been distributed.

tech

Use the tech command to enter tech mode. This command is reserved for service
personnel use only.

terminal

User level: user, privileged, supervisor
Use the terminal width and terminal length commands to set the width
and length of the terminal display in characters.
The syntax for this command is:
terminal {width|length} [<characters>]
Example:
Router-N> terminal width 80
terminal width: 80

username

User level: supervisor
Adds a local user account.
By default there is only a single user account, named 'root', with password
'root', which access the administrator level. You cannot delete this basic user
account, nor can you modify its access level. You can modify its basic password.
The syntax for this command is:
username <name> password <passwd> access-type {read-only|read-
write|admin}
name
passwd
160
New user name (minimum four characters)
User's password (minimum four characters)
Avaya P330 Reference Guide