Ip Access-Default-Action; Ip Access-Group - Avaya P330 Reference Manual

Chapter 3 Avaya P330 Layer 3 CLI Commands
Example:
Router-N(configure)# interface marketing
Done!
Router-1(config-if:marketing)#
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".

ip access-default-action

User level: privileged, supervisor.
Use the ip access-default-action command to set the default action for a
specific policy list.
The syntax for this command is:
ip access-default-action <policy-list-number> <default-
action>
<policy-list-number>
<default-action>
Example:
Router-N(configure)# ip access-default-action 101 default-
action-deny
Done!

ip access-group

User level: privileged, supervisor.
Use the ip access group command to activate a specific policy list.
The syntax for this command is:
ip access-group <policy-list-number> <default-action>
<policy-list-number>
<default-action>
176
integer (100 - 149)
permit|deny
integer (100 - 149)
permit|deny
Avaya P330 Reference Guide