Port Health Violations Widget - Brocade Communications Systems WFT-2D User Manual

Port Health Violations widget

The Port Health Violations widget
based on the selected fabric and a specified time range. There are four port health violation
widgets: All, ISL, Initiator, and Target.
FIGURE 126
The Port Health Violations widget displays the following data for each product:
•
•
•
•
•
•
•
•
•
•
Brocade Network Advisor SAN User Manual
53-1003154-01
Port Health Violations widget
Severity icon/port count/widget title — The color of the worst severity and the number of
products with that severity displays before the widget title.
Product — A product label such as product name, IP address, node WWN, domain ID, or zone
alias.
Port — A port identifier such as port name, number, address, WWN, user port number, or zone
alias.
NOTE
All non-FC ports display either the MAC address or the port name instead of WWN.
Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
-
Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
-
Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
-
Target — The target port on the connected device. Click to launch the device properties
dialog box.
Violation Count — The number of MAPS and Fabric Watch rule violations for the port.
CRC Errors — The number of times an invalid cyclic redundancy check error occurs on a port or
a frame that computes to an invalid CRC.
Invalid Tx Words — The number of times an invalid transmission word error occurs on a port.
Loss of sync — The number of times a synchronization error occurs on the port.
Link Failures — The number of times a link failure occurs on a port or sends or receives NOS.
Loss of Signal — The number of times that a signal loss occurs in a port.
Monitoring and Alerting Policy Suite widgets
(Figure 126) displays the number of violations for each product
7
295